This website was discontinued on 20/12/2022. Visit the new website at www.fct.pt.
Mid-Frequency Structural-Acoustic FE Models for Automotive CAE
César Miguel de Almeida Vasques
INEGI - Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial (INEGI/UP)
3D Hybrid Composite Materials: Modelling, Structural Design and Tribological Behaviour
Jose Manuel Ramos Gomes
Universidade do Minho (UM)
Assessment of numerical models of shell structures and welded joints details
Nuno Ferreira Rilo
Faculdade de Ciências e Tecnologia da Universidade de Coimbra (FCT/UC)
EVACOMP - EVALUATION OF MECHANICAL BEHAVIOUR AFTER DAMAGE IN COMPOSITE MATERIALS STRUCTURES
Luís Miguel Pereira Durão
Instituto Superior de Engenharia do Porto (ISEP/IPP)
Design of Polymeric Implants for Veterinary Use: bone remodelling and fracture healing
Eduardo António Corregedor Borges Pires
Instituto Superior Técnico (IST/ULisboa)
New delamination buckling tests for composites
Alfredo Manuel Balacó de Morais
Universidade de Aveiro (UA)
Analysis and optimization of the surgical correction of scoliosis and kyphosis
José Firmino Aguilar Madeira
Instituto de Engenharia Mecânica (IDMEC)
Experimental and Numerical Characterization of Composite Materials With Long Natural Fibers
Arlindo José de Pinho Figueiredo e Silva
Instituto Superior Técnico (IST/ULisboa)
Hybrid cruciform specimen for biaxial testing of laminated composites
Alfredo Manuel Balacó de Morais
Universidade de Aveiro (UA)
Structural improvement of Aluminium alloys used on shipbuilding
Rui Fernando Martins
Fundação da Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa (FFCT/FCT/UNL)
Development of a 3D dynamic plantar force measurement system for biomechanical and biomedical foot characterization
Maria Arcelina Marques
INEGI - Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial (INEGI/UP)
Research of mechanical behavior and failure of wood under high strain rate loads
Rui Jorge Sousa Costa de Miranda Guedes
INEGI - Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial (INEGI/UP)
Mechanical Performance Modeling during Degradation for Biodegradable Product Development
Rui Jorge Sousa Costa de Miranda Guedes
INEGI - Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial (INEGI/UP)
Resistência de Juntas Estruturais Coladas na Construção Naval
Leigh Stuart Sutherland
Instituto Superior Técnico (IST/ULisboa)
VIBATRACK - Vibration Attenuation in High Speed Railway Tracks
Nuno Manuel Mendes Maia
Instituto de Engenharia Mecânica (IDMEC)
Development of an experimental and computational mixed module for testing structures with dimensions in the mesoscale range (0.1-20mm)
Joaquim Infante Barbosa
Universidade de Évora (UE)
Time-Domain Spectral FEs and Structural Intensity Damage Metrics for SHM Technologies
César Miguel de Almeida Vasques
INEGI - Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial (INEGI/UP)
In Vivo biomechanical characterization and development of a constitutive model to describe bone remodeling process
Lídia Carvalho
Universidade de Aveiro (UA)
ESPERT - Smart structure based on distributed optical sensing using microstructured fibre
Orlando José Reis Frazão
Instituto de Engenharia de Sistemas e Computadores do Porto (INESC Porto/FE/UP)
Fiplac - Fatigue initiation in plastics and short fibber composites
Luís Manuel Pires Martins Abreu
Faculdade de Ciências e Tecnologia da Universidade de Coimbra (FCT/UC)
Determination of cohesive laws in wood
Nuno Miguel Magalhães Dourado
Universidade de Trás-os-Montes e Alto Douro (UTAD)
Application of impact mechanics in the design of implants for bone replacement
Nuno Ricardo Maia Peixinho
Universidade do Minho (UM)
Development of a nano enhanced cork based sandwich composite
Paulo Nobre Balbis Reis
Universidade da Beira Interior (UBI)
HyREn - Mechatronics design of an integrated hydraulic system for saving and recovery braking and damping suspension energies in electric/hybrid cars
EURICO AUGUSTO RODRIGUES DE SEABRA
Universidade do Minho (UM)
The design of "one-off" mechanical products
ANTÓNIO MANUEL FLORES ROMÃO DE AZEVEDO GONÇALVES COELHO
Fundação da Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa (FFCT/FCT/UNL)
MO-MDO: Integrated Optimization Framework
António Gaspar Lopes da Cunha
Universidade do Minho (UM)
Identification of material parameters and damage for optimal design of laminated thermo-piezo-viscoelastic composites
Carlos Mota Soares
Instituto de Engenharia Mecânica (IDMEC)
Development of sensor for stresses measurement in structures
João Eduardo Pinto Castro Ribeiro
INEGI - Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial (INEGI/UP)
Improving the performance of composites subjected to low-velocity impact, with the inclusion of nanocomposites as reinforcement.
Ana Paula Betencourt Martins Amaro
Faculdade de Ciências e Tecnologia da Universidade de Coimbra (FCT/UC)
Determination of biomechanical characteristics of the intervertebral disc using optical fiber sensors
José António de Oliveira Simões
Universidade de Aveiro (UA)
Study and development of external radiotherapy for oncology pathologies using advanced phantoms and multimodal tomographic imaging
José António de Oliveira Simões
Universidade de Aveiro (UA)
Fatigue Reliability of Marine Structures Subjected to Wide-Band Multimodal Loadings
Yordan Garbatov
Instituto Superior Técnico (IST/ULisboa)
A multiscale approach to study the dynamical behavior of the human knee
Renato Manuel Natal Jorge
Instituto de Engenharia Mecânica (IDMEC)
WEARWHEEL - Wear of Railway Vehicles Steel Wheels
João Pombo
Instituto de Engenharia Mecânica (IDMEC)
Cellular and porous materials for defence and protection
Filipe Miguel Horta e Vale Teixeira-Dias
Universidade de Aveiro (UA)
Development of Fire Resistant Polymer Matrix Composites - FIRECO
João Pedro Lourenço Gil Nunes
Universidade do Minho (UM)
Design of Functionally Graded Materials for Structural Applications Obtained by an Induction Assisted Two-Axis Centrifugal Casting Technique
Delfim Soares
Universidade do Minho (UM)
Development of Multifunctional Materials with Improved Mechanical and Fatigue Performance
FILIPE SAMUEL CORREIA PEREIRA DA SILVA
Universidade do Minho (UM)
Development and validation of robust data mining tools for structural health monitoring (SHM)
KHATKHATE AMOL MADHAV
Instituto de Engenharia Mecânica (IDMEC)
SKINTEXTILE - Contact interactions between the skin and textiles
Amílcar Lopes Ramalho
Faculdade de Ciências e Tecnologia da Universidade de Coimbra (FCT/UC)
CAD-2-LCA_Development of an interface between modeling and environmental applications for design of machine-tools
Ana Rosanete Lourenço Reis
INEGI - Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial (INEGI/UP)
New hybrid experimental-numerical methodology for fracture mechanics structural analysis
Pedro Miguel Guimarães Pires Moreira
INEGI - Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial (INEGI/UP)
Development of an Ilizarov fixator apparatus
CARLOS ALEXANDRE BENTO CAPELA
Instituto Politécnico de Leiria (IPLeiria)
Multi-scale approach for high strength steels: Physical modeling and failure prediction
BHARAT BHOOSHAN PANIGRAHI
Universidade de Aveiro (UA)
U-BLAST - Multiscale modelling of terrorist attacks in urban environments
Filipe Miguel Horta e Vale Teixeira-Dias
Universidade de Aveiro (UA)
ESHM - Embedding of sensors in composite materials for implementation of Structural Health Monitoring in commercial airplanes parts
Rui Fernando da Costa Oliveira
INEGI - Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial (INEGI/UP)
Computational and Experimental Models for the Biomechanical Analysis of the Shoulder Prosthesis
João Orlando Marques Gameiro Folgado
Instituto de Engenharia Mecânica (IDMEC)
Development of a new spacer using CFD optimization and experimental tests
SENHORINHA DE FÁTIMA CAPELA FORTUNAS TEIXEIRA
Universidade do Minho (UM)
SURWET_COOLS: The effects of surface wettability and roughness on microchannel evaporative heat transfer - application to cooling systems
Antonio Luis Nobre Moreira
Instituto Superior Técnico (IST/ULisboa)
Mechanical and energetic characterization of pelletes made from leguminous shrubs.
Carlos Pinho
INEGI - Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial (INEGI/UP)
Performance evaluation and optimization of a mixing system with water saving function
Vítor António Ferreira da Costa
Universidade de Aveiro (UA)
Two-phase fluid in complex flow structures (TWOFLUIPLEX)
Antonio Alberto Ferreira Miguel
Universidade de Évora (UE)
Development of a Protocol for the Systematic Design of the Set Piston-Piston Pin-Piston Rings-Cylinder and Connecting Rod of Internal Combustion Engines
PEDRO DE FIGUEIREDO VIEIRA CARVALHEIRA
Faculdade de Ciências e Tecnologia da Universidade de Coimbra (FCT/UC)
Hydroelastic analysis of floating structures using a high order panel method
Ranadev Datta
Instituto Superior Técnico (IST/ULisboa)
Conductive ZnO:Zn target composition for high rate sputtering deposition of ZnO thin films
Qi Hua Fan
Universidade de Aveiro (UA)
Closed loop solar pond desalination system
Margarida Lima
Laboratório Nacional de Energia e Geologia, I.P. (LNEG)
Favourable and adverse pressure gradient turbulent boundary layer flows of viscoelastic fluids
João Pedro Gomes Moreira Pêgo
Faculdade de Engenharia da Universidade do Porto (FE/UP)
Theoretical and experimental investigation on power take-off systems for oscillating-body wave energy converters
Luis Manuel DE CARVALHO GATO
Instituto de Engenharia Mecânica (IDMEC)
Numerical and experimental modeling of phenomena involving free surface deformation due to wind erosion
Almerindo Ferreira
Associação para o Desenvolvimento da Aerodinâmica Industrial (ADAI)
Evaluation of comfort conditions of non-uniform environment in desks equipped with localized HVAC systems
Eusebio Conceição
Universidade do Algarve (UAlg)
Investigation into an Improved Ejector for Variable Operating Conditions
Szabolcs Varga
INEGI - Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial (INEGI/UP)
Ignition and combustion of cork dust
Rosa Maria Barbosa Rodrigues Pilão
Instituto Superior de Engenharia do Porto (ISEP/IPP)
Stabilization of Ship Parametric Rolling in Waves
SÉRGIO BRUNO NOGUEIRA RIBEIRO E SILVA
Instituto Superior Técnico (IST/ULisboa)
DESENVOLVIMENTO DE UM RANGE EXTENDER PARA VEÍCULOS ELÉCTRICOS
Jorge MARTINS
Universidade do Minho (UM)
Experimental and Numerical Investigation on Exhaust After Treatment Systems for Automotive Vehicles
Mário Costa
Instituto de Engenharia Mecânica (IDMEC)
Destruction of the tar present in syngas by combustion in porous media
Mário Costa
Instituto de Engenharia Mecânica (IDMEC)
A physical insight of aeroacoustic instabilities in heat exchangers
Miguel Ângelo Pereira Bento Moreira
Instituto Politécnico de Setúbal (IPSetúbal)
Study of a thermal system for micro-production of electricity with application to residential buildings.
Ana Isabel Palmero Marrero
Instituto de Engenharia Mecânica (IDMEC)
Cost-Effective Wave Energy Converter
Jose Maria Campos da Silva Andre
Instituto de Engenharia Mecânica (IDMEC)
Influence of biofuel composition and moisture air on spark ignition success of lean reactive mixtures
Edgar Caetano Fernandes
Instituto Superior Técnico (IST/ULisboa)
Energy efficient technology for passive heating and cooling of buildings
Pedro Nuno Dinho Pinto da Silva
Universidade da Beira Interior (UBI)
SCOUT-SMAV - Scalable and COoperative UniT of Swarming Micro Aerial Vehicles
João Manuel Melo de Sousa
Instituto de Engenharia Mecânica (IDMEC)
SUPERCOOL-Development and optimization of a vacuum non-auto-evaporative process of cooling and freezing of foodstuffs
José Joaquim da Costa
Associação para o Desenvolvimento da Aerodinâmica Industrial (ADAI)
MicroFLoP - A general tool for Local Pressure Loss Prediction in Microfluidic Networks
Mónica Sofia Neves de Freitas Oliveira
Faculdade de Engenharia da Universidade do Porto (FE/UP)
Virtual tools for project, development and tuning of wave energy converters
Jorge Augusto Fernandes Ferreira
Universidade de Aveiro (UA)
Control of environmental tobacco smoke by local ventilation strategies (CETS)
António Manuel Gameiro Lopes
Associação para o Desenvolvimento da Aerodinâmica Industrial (ADAI)
Stirling Engine Regenerators
Francisco Miguel Ribeiro Proença Brójo
Universidade da Beira Interior (UBI)
BLASTRUCT - RESPONSE OF BUILDING CONCRETE STRUCTURES UNDER EXPLOSION
José Carlos Miranda Góis
Associação para o Desenvolvimento da Aerodinâmica Industrial (ADAI)
Investigation of incineration in grate firing systems
João Luis Toste de Azevedo
Instituto de Engenharia Mecânica (IDMEC)
Human thermal comfort: a CFD approach
SENHORINHA DE FÁTIMA CAPELA FORTUNAS TEIXEIRA
Universidade do Minho (UM)
Advanced non-linear hydrodynamic modelling of wave energy converters
António José Nunes de Almeida Sarmento
Offshore e Renewables, Centro de Energia Offshore (WAVEC)
Micro-Forming of Polymer Parts
Luís Manuel Mendonça Alves
Instituto de Engenharia Mecânica (IDMEC)
Modelling and proof validation of magnesium components obtained from tailor-welded blanks
Marco Paulo Lages Parente
Instituto de Engenharia Mecânica (IDMEC)
Thermo-mechanical analysis of nanocrystalline diamond films for micro injection moulding
VICTOR FERNANDO SANTOS NETO
Universidade de Aveiro (UA)
NUMERICAL MODELING AND ANALYSIS OF POLYMER COATED METAL SHEET IN FORMING PROCESSES
Francisco Andrade Pires
Instituto de Engenharia Mecânica (IDMEC)
Biomechanical study of reinforced resin posts and cements interface with root canal dentine
Lídia Carvalho
Universidade de Aveiro (UA)
PROJECT 27 - ANALISYS AND PREDICTION OF DAMAGE IN ADVANCED COMPOSITES
Luís Miguel Pereira Durão
INEGI - Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial (INEGI/UP)
FastStamp: Improvement of a Sheet Metal Forming FEA code by using HPC and new speed-up algorithms.
José Luis de Carvalho Martins Alves
Universidade do Minho (UM)
BioPlan - DEVELOPMENT OF REAL TIME INTRA-OPERATIVE SURGERY TOOL WITH RAPID MANUFACTURING SYSTEM FOR CUSTOMIZED BIOMEDICALDEVICES
Carlos Alberto Moura Relvas
Universidade de Aveiro (UA)
Development of numerical methodologies for design and shape optimization of metal forming tools
António Gil Andrade-Campos
Universidade de Aveiro (UA)
Development of highly sensitive strain sensors based on Tunnel Magnetoresistive (TMR) devices
Elby Titus
Universidade de Aveiro (UA)
NanoFGM - Nanostructured Metal Matrix Functionally Graded Composites through Severe Plastic Deformation
Alexandre José da Costa Vélhinho
Fundação da Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa (FFCT/FCT/UNL)
Mechanical behaviour of carbon nanotubes: modelling and numerical simulation.
José Valdemar Bidarra Fernandes
Faculdade de Ciências e Tecnologia da Universidade de Coimbra (FCT/UC)
Advanced welding technologies of aluminium to copper - ALCOW
Altino de Jesus Roque Loureiro
Faculdade de Ciências e Tecnologia da Universidade de Coimbra (FCT/UC)
EFFIMOULD - Use of a common surface engineering solution for improving molding efficiency in a large range of temperatures.
Albano Augusto Cavaleiro Rodrigues de Carvalho
Faculdade de Ciências e Tecnologia da Universidade de Coimbra (FCT/UC)
Innovative ceramic block moulding foundry process to cast complex titanium alloys parts
Teresa Duarte
INEGI - Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial (INEGI/UP)
Development of innovative formulations for the numerical simulation of bulk forming of complex parts
ROBERTT ÂNGELO FONTES VALENTE
Universidade de Aveiro (UA)
NDTSand - Sandwich skin-core disbond identification from high-frequency operational deflection shape analysis
Rui António da Silva Moreira
Universidade de Aveiro (UA)
BoneCement - Study of Polimerization process of bone cement for cemented implants
António Manuel Amaral Monteiro Ramos
Universidade de Aveiro (UA)
Manufacturing of Micro Moulds by Non-Conventional Technologies
PEDRO ALEXANDRE RODRIGUES CARVALHO ROSA
Instituto de Engenharia Mecânica (IDMEC)
Numerical prediction of time dependent springback in aluminum sheets.
Ricardo Alves de Sousa
Universidade de Aveiro (UA)
Asymmetric rolling of metal sheets
Fábio Jorge Pereira Simões
Instituto Politécnico de Leiria (IPLeiria)
Mechanical behaviour of oligocrystals: experimental and numerical investigation
Nataliya Sakharova
Faculdade de Ciências e Tecnologia da Universidade de Coimbra (FCT/UC)
Microinjection moulding of hybrid systems
MÓNICA SANDRA ABRANTES DE OLIVEIRA CORREIA
Universidade de Aveiro (UA)
Validation of a methodology for establishing process parameters in Friction Stir Welding
Dulce Maria Esteves Rodrigues
Faculdade de Ciências e Tecnologia da Universidade de Coimbra (FCT/UC)
HSSLaserPrototyping - Rapid Prototyping of HSS-based 3D components by High-Power Fiber-Laser Forming
Ana Rosanete Lourenço Reis
INEGI - Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial (INEGI/UP)
Moving forward in the applicability and reliability of models for failure prediction of metallic parts in forming operations: anisotropy, experimental calibration and assessment
Jose Cesar de Sa
Instituto de Engenharia Mecânica (IDMEC)
From macro to micro manufacturing of metals : strategy, modelling and processing
Maria Teresa Freire Vieira
Faculdade de Ciências e Tecnologia da Universidade de Coimbra (FCT/UC)
GramFri - Graded Actuation in Shape Memory Manufactured by Friction Welding
FILIPE CARLOS DE FIGUEIREDO PEREIRA DAS NEVES
Fundação da Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa (FFCT/FCT/UNL)
Mechatronic Aided Joining of Materials - MAJOM
Anibal Guedes
Universidade do Minho (UM)
ROUNDFAB - Development of new processes for production of cylindrical targets
Manuel António Peralta Evaristo
Faculdade de Ciências e Tecnologia da Universidade de Coimbra (FCT/UC)
Application of Fracture Mechanics to wood cutting
Nuno Miguel Magalhães Dourado
Universidade de Trás-os-Montes e Alto Douro (UTAD)
FIBERFORM - Conformação Virtual de Compósitos Avançados de Matriz Termoplástica
Nuno André Curado Mateus Correia
INEGI - Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial (INEGI/UP)
Eco micro4MIN: EcoDesign and Development of micro-forming technologies
Luis Filipe Martins de Menezes
Faculdade de Ciências e Tecnologia da Universidade de Coimbra (FCT/UC)
Mechanical benchmark and cost models for innovative solutions for structural connections
Pedro Miguel Guimarães Pires Moreira
INEGI - Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial (INEGI/UP)
ModPUL - Numerical Modelling of the Pultrusion Process using the Finite Element Method
António Torres Marques
INEGI - Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial (INEGI/UP)
SEESURF - Development of Non-Destructive Testing Techniques for Surface Defects Evaluation in Advanced Engineering Materials
Pedro Miguel dos Santos Vilaca da Silva
Instituto de Engenharia Mecânica (IDMEC)
WeldImp - Development of Mechanical Performance of Bimetallic Structures Produced by Friction Stir Welding and Submitted to Improvement Techniques
Virgínia Isabel Monteiro Nabais Infante
Instituto Superior Técnico (IST/ULisboa)
Advanced Models for Predicting the Formability of Dual-Phase Steels
Marilena Carmen Butuc
Universidade de Aveiro (UA)
Isogeometric Analysis: automatic finite element technology on CAD higher order geometries
Jose Cesar de Sa
Instituto de Engenharia Mecânica (IDMEC)
High performance aluminium alloys - from atomic scale modeling and simulation to industrial production
Gabriela Tamara Vincze
Universidade de Aveiro (UA)
SimCast - Numerical improvement of titanium alloys investment casting
Ana Rosanete Lourenço Reis
INEGI - Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial (INEGI/UP)
PELVICMESH - Development of new synthetic meshes implants for application in surgeries for correction of female pelvic floor dysfunctions
Marco Paulo Lages Parente
Instituto de Engenharia Mecânica (IDMEC)
Nanocrystalline diamond coatings for high performance mechanical seals
VICTOR FERNANDO SANTOS NETO
Universidade de Aveiro (UA)
Development of a multi-scale approach for the microstructure/properties relationship in polymer nanocomposites
Said Ahzi
Universidade de Aveiro (UA)
Extending the capabilities of the eXtended Finite Element Method in material failure modeling
Jose Cesar de Sa
Instituto de Engenharia Mecânica (IDMEC)
DADORA - Demonstrator of Autonomous Airship Solutions for Aerial Observation
Alexandra Bento Moutinho
Instituto de Engenharia Mecânica (IDMEC)
Adaptive and Intelligent Control of Piezoelectric Damping Technologies in Varying Operation Conditions
César Miguel de Almeida Vasques
INEGI - Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial (INEGI/UP)
SmartFlexibleMultibodySystems
Maria Augusta Neto
Faculdade de Ciências e Tecnologia da Universidade de Coimbra (FCT/UC)
SurgRob - Interacção Física Humano-Robô para Aplicações Cirúrgicas Tolerantes a Falhas
José Manuel Gutierrez Sá da Costa
Instituto Superior Técnico (IST/ULisboa)
Development of robotic cell for research in implant dentistry
Joaquim Norberto Cardoso Pires da Silva
Universidade de Coimbra (UC)
SCAAS - Safe Controllers for Avionics and Aerospace Systems
José Machado
Universidade do Minho (UM)
Smart Skins
Ian Oakley
Universidade da Madeira (UMA)
NestOR: Leather nesting in the automotive industry
Cláudio Alves
Universidade do Minho (UM)
Wire Harness Management
Cristina Requejo
Universidade de Aveiro (UA)
A simulation optimization methodology to define technological processes setups
Cristóvão Silva
Faculdade de Ciências e Tecnologia da Universidade de Coimbra (FCT/UC)
Resources Selection Flexible and Intelligent Model for the Distributed/Agile/Virtual Enterprises
Paulo António da Silva Ávila
Instituto Superior de Engenharia do Porto (ISEP/IPP)
TACTIQ - Implementing Quality initiatives to Improve organisational outcome
Sérgio Dinis Teixeira de sousa
Universidade do Minho (UM)
OPTRIM - Optimal Weight and Balance Procedures in Flight Operations of Commercial Airplanes
Kouamana Bousson
Universidade da Beira Interior (UBI)
Lean Six Sigma in Project Management (TLS-PM)
Virgílio Machado
Fundação da Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa (FFCT/FCT/UNL)
Robust Lean Six Sigma Engineering Design (RoL6SED)
Virgílio Machado
Fundação da Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa (FFCT/FCT/UNL)
OptOSChain - Optimal Planning & Scheduling of the Oil Supply Chain
Susana Isabel Carvalho Relvas
Instituto Superior Técnico (IST/ULisboa)
Business Interoperability for Collaborative Platforms with Axiomatic Design Theory for Lean, Agile, Resilient and Green Industrial Ecosystems
Antonio Carlos Bárbara Grilo
NOVA.ID.FCT - Associação para a Inovação e Desenvolvimento da FCT (NOVA.ID.FCT)
ADVANCES ON THE UNDERSTANDING AND PREDICTION OF STRESS CORROSION CRACKING
Maria Teresa Oliveira de Moura e Silva
Instituto Superior de Engenharia de Lisboa (ISEL/IPL)
Distributed Dynamic Production Planning and Control for Order Oriented Systems (DIDYPPC)
Rui Manuel de Sá Pereira de Lima
Universidade do Minho (UM)
Numerical simulation and production of polymeric functionally graded materials
Carla Roque
INEGI - Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial (INEGI/UP)
MOVEHAND - DEVELOPMENT OF A NEW CONCEPT OF MINI-INVASIVE RADIOCARPAL ENDOPROSTHESIS.
António Completo
Universidade de Aveiro (UA)
Nanomechanics of 1D materials
Pedro Miguel Ferreira Joaquim da Costa
Universidade de Aveiro (UA)
Silicon nitride ceramic components coated with nanocrystalline CVD diamond for total hip replacement - HIPCerDiam
Margarida Isabel dos Santos Amaral
Universidade de Aveiro (UA)
TMJ implant- Study and development a new TMJ implant
António Manuel Amaral Monteiro Ramos
Universidade de Aveiro (UA)
Enhancement of mechanical properties on nano-filled hybrid composites
José Martins Ferreira
Universidade de Coimbra (UC)
Numerical simulation and design of extruded integrally stiffened panels (ISP) joined by friction stir welding (FSW) for aeronautic applications
ROBERTT ÂNGELO FONTES VALENTE
Universidade de Aveiro (UA)
Numerical and experimental study of cohesive laws in bonded wood joints
Jose Joaquim Lopes Morais
Universidade de Trás-os-Montes e Alto Douro (UTAD)
Fatigue life improvement of aluminum fusion welds by friction stir processing
JOSE DOMINGOS MOREIRA DA COSTA
Universidade de Coimbra (UC)
Development of ligament tissue reinforcements in biodegradable PCL/PLA/PBG composite fibres
Rui Jorge Sousa Costa de Miranda Guedes
INEGI - Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial (INEGI/UP)
Numerical modelling of fatigue crack propagation
Fernando Ventura Antunes
Universidade de Coimbra (UC)
Development of advanced parts for impact energy absorption using carbon nanotubes as metallic foam reinforcement with functionally graded properties
Nuno Ricardo Maia Peixinho
Universidade do Minho (UM)
Design and experimental testing of a power take-off system for the ANACONDA wave energy conversion device
Antonio Carlos Mendes
Universidade da Beira Interior (UBI)
TURBELAST - Turbulence modelling for viscoelastic fluids: RANS and LES approaches
Fernando Manuel Coutinho Tavares de Pinho
Faculdade de Engenharia da Universidade do Porto (FE/UP)
IProExt - Integrated system for the automatic design of profile extrusion production tools
João Miguel Amorim Novais da Costa Nóbrega
Universidade do Minho (UM)
EXTENSION - Extensional flow of complex fluids in microfluidic devices
Manuel António Moreira Alves
Faculdade de Engenharia da Universidade do Porto (FE/UP)
EXTREME - Prediction of Extreme Forest Fire Behaviour
Domingos Xavier Viegas
Associação para o Desenvolvimento da Aerodinâmica Industrial (ADAI)
Head protection systems: New solutions based on the use of alternative materials and advanced injury criteria.
Ricardo Alves de Sousa
Universidade de Aveiro (UA)
STEERLAM - Damage Tolerance of Fibre-Steered Composite Panels
Claudio Saul Faria Lopes
INEGI - Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial (INEGI/UP)
SIMUGROWTH -DEVELOPMENT OF A COMPUTATIONAL MODEL TO PREDICTION OF BIOMECHANICAL PROPERTIES OF ENGINEERED TISSUE CARTILAGE AS FUNCTION OF THE MECHANICAL STIMULUS IN A BIOREACTOR ENVIRONMENT
António Completo
Universidade de Aveiro (UA)
Characterization of the Constitutive Behavior of Metal Sheets from a Single Multi-Path-Experimental-Test by Inverse Analysis
José Valdemar Bidarra Fernandes
Universidade de Coimbra (UC)
FSW, optimization and joint strength prediction based on the Taguchi and Artificial Neural Network methods
Pedro Miguel Guimarães Pires Moreira
INEGI - Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial (INEGI/UP)
ModTOP - Numerical Modelling of the Tow Placement Process
António Torres Marques
INEGI - Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial (INEGI/UP)
Numerical simulation of dual-phase steel sheet forming: multi-scale constitutive models and prediction of defects in automotive parts
ROBERTT ÂNGELO FONTES VALENTE
Universidade de Aveiro (UA)
High-Level programming for industrial robotic cells: capturing human body motion.
Joaquim Norberto Cardoso Pires da Silva
Universidade de Coimbra (UC)
ADSyS - Adaptive Decision Support System for Interactive Scheduling with MetaCognition and User Modelling Experience
Ana Maria Dias Madureira Pereira
Instituto Superior de Engenharia do Porto (ISEP/IPP)